How Can You Fix PC Dll Errors Effectively?: Tech Support: 1T Hard drive good on Win 7 but Raw on Win 8

2016年3月15日星期二

Tech Support: 1T Hard drive good on Win 7 but Raw on Win 8

1T Hard drive good on Win 7 but Raw on Win 8

I have recently upgraded my desktop to a new machine with Windows 8.
I have a Western Dtgital 1T hard drive in an external USB2 / eSATA case and the drive has a SATA connection inside the case.
I use this drive to store photos and videos etc, not as a boot
drive.
I also have a work laptop running Win 7 (company policy) that has an eSATA port and the external drive works perfectly on the laptop.
It is NTFS file system and about half full.
When I plug the external drive into the new Win 8 desktop it comes up as
a RAW drive (1T) and is not accessible within windows (it is recognised as the correct hardware in the BIOS and in the disk manager).
Any attempt to look at the drive in Windows Explorer comes up with a request that I format the drive, obvioulsy something
I will never do.
I have searched numerous forums for a sensible answer and most ask that the drive letter be changed (doesn't work) or that the drive's errors be fixed (it works perfectly on the Win 7 laptop so is not corrupted).
I have also removed the drive
from its case and directly connected it to the Win 8 machine motherboard SATA in the same arrangement as the internal HDD (comes up exactly the same as when it is inside the casev - RAW 1T drive and a request to please format).
I have also connected to USB2
on both machines with the same outcome (working perfectly - but slower - on the Win 7 laptop, RAW 1T drive on the Win 8 desktop).
I have also updated the BIOS for the Win 8 motherboard.
I am basically out of options.
Any reasonable suggestions above and beyond
those listed will be greatly appreciated.
Suggestions that involve backing up the drive (to a new one - this is what I am trying to avoid), format it, and start again will not be seen in a good light.
I am assuming that there is a sensible way for a drive
that works perfectly on Win 7 to be visible on a Win 8 machine without losing the data.

Keys to the Problem 1T Hard drive good on Win 7 but Raw on Win 8

Download Error Fixer for Free Now

Hi,

Is it possible that the WD drive has installed some type of auto-backup software that is required to read it? Some external Seagate drives do this...

Is it possible that the "Work" laptop has somehow encrypted the drive with Bit Locker or some other type of security feature?

Windows Error Reporting - To Fix 1T Hard drive good on Win 7 but Raw on Win 8

Go to Start button.
Open Control Panel.
Go to Windows Error Reporting.
Click on System and Maintenance, then click Problem Reports and Solutions.
Next, click Change Settings located on the left side panel of the Problem Reports and Solutions window.
Select an option to configure how you want Windows to look for a solution to your problems. You may allow Windows to do it automatically or ask you every time to check if problem occurs.
Next, click the Advanced settings link.
Select Off to turn off Error Reporting.

Another Safe way to Repair the Problem: 1T Hard drive good on Win 7 but Raw on Win 8:

How to Fix 1T Hard drive good on Win 7 but Raw on Win 8 with SmartPCFixer?

1. Download SmartPCFixer . Install it on your system. Click Scan, and it will perform a scan for your computer. The errors will be shown in the scan result.

2. After the scan is finished, you can see the errors and problems need to be repaired. Click Fix All.

3. The Fixing part is finished, the speed of your computer will be much higher than before and the errors have been fixed.

没有评论:

发表评论

注意：只有此博客的成员才能发布评论。